2023 New Holland Discbine® 209/210 Side-Pull Disc 209

Selling Price -

Click for a Quote

Information

New - New Holland Discbine 209R Mower Conditioner
Side-Pull, Straight Tongue
Cutting Width 9'-2"
Roller Conditioner Type
Disc Speed RPM 3000

Photos

Highlights

  • Dothan AL
  • New
  • 010121833
  • 2023
  • New Holland
  • Discbine® 209/210 Side-Pull Disc 209
  • HBJDB209CPN280967
  • 0
  • Available
  • Swath: 6 ft. (1.83 m) | Operating: 14' 10" ft. in. (4.52 m)
  • Cutting: 1.1 2.7 in. (29-68 mm) | Operating: 4' 5" ft. in. (1.35 m)

Specifications

  • 2023
  • New Holland
  • Discbine® 209/210 Side-Pull Disc
  • 209
  • General
  • 65 hp (49 kW)
  • Secondary: Non-CV driveline
  • Method: PTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar | Roll Conditioners Method: 4 HB V-belt and enclosed gears | LeaningEdge Flail Conditioners Method: 4 HB v-belt
  • 9.5L x 14L 6PR
  • 7-pin electrical connector for transport lights
  • Disc speed @ 540 rpm PTO: 3000 rpm | Roll Conditioners Speed: 647 rpm | LeaningEdge Flail Conditioners Speed: 718 rpm | Driveline Input: 540 rpm
  • Max road: 20 mph (32 kph)
  • Relief pressure required: 1500 psi (103 bar)
  • Number of discs: 7 | Flotation: Up & back, adjustable springs | Roll Conditioners Type: Chevron intermeshing rubber | Conditioner roll tension adjustment: Single crank | Conditioner gap adjustment: Adjustable drawbolt stop, each end | LeaningEdge Flail Conditioners Conditioner gap adjustment: Single crank adjustable rotor hood | Tongue Options Type: Side-pull, straight tongue
  • Drawbar with CV PTO | Drawbar: ASAE Category II
  • Driveline protection: Slip clutch and overrunning clutch assembly at rear of PTO shaft
  • Tilt angle degrees: 2° - 10° | Roll Conditioners Diameter: 10.4 in. (264 mm) | LeaningEdge Flail Conditioners Diameter: 22 in. (560 mm)
  • 9' 2" in. (2.8 m)
  • With head fully raised: 17 in. (4.32 mm)
  • Cutting: 1.1 2.7 in. (29-68 mm) | Operating: 4' 5" ft. in. (1.35 m)
  • 90 in. (2286 mm) | LeaningEdge Flail Conditioners: 90 in. (2286 mm) | Operating: Flail Tine: 17' 8" ft. in. (5.4 m) or Roll: 17' 2" ft. in. (5.23 m)
  • Swath: 6 ft. (1.83 m) | Operating: 14' 10" ft. in. (4.52 m)
  • 3-6 ft. (0.9 m -1.83 m)
  • 5' 8" ft. in. (1.73 m)
  • Flail Tine: 18' 1" ft. in. (5.50 m) or Roll: 17' 7" ft. in. (5.23 m)
  • 9' 11" ft. in. (3.02 m)
  • Operating: Flail Tine: 3690 lbs. (1674 kg.) / Roll: 3740 lbs. (1697 kg.)
  • MowMax™ Modular Cutterbar with ShockPRO™ hubs
  • LeaningEdge Flail Conditioners Type: Flail rotor with 90 tapered flails
  • Per disc: 2