Back

2023 New Holland Discbine® 209/210 Side-Pull Disc 209

MoreLess
Limited Time Offer!

Selling Price -
Click for a Quote

No Images Available

Selling Price -

Click for a Quote

HD Certified Pre-Owned
New - New Holland Discbine 209R Mower Conditioner
Side-Pull, Straight Tongue
Cutting Width 9'-2"
Roller Conditioner Type
Disc Speed RPM 3000
  • 2023
  • New Holland
  • Discbine® 209/210 Side-Pull Disc
  • 209
  • General
  • 65 hp (49 kW)
  • Secondary: Non-CV driveline
  • Method: PTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar | Roll Conditioners Method: 4 HB V-belt and enclosed gears | LeaningEdge Flail Conditioners Method: 4 HB v-belt
  • 9.5L x 14L 6PR
  • 7-pin electrical connector for transport lights
  • Disc speed @ 540 rpm PTO: 3000 rpm | Roll Conditioners Speed: 647 rpm | LeaningEdge Flail Conditioners Speed: 718 rpm | Driveline Input: 540 rpm
  • Max road: 20 mph (32 kph)
  • Relief pressure required: 1500 psi (103 bar)
  • Number of discs: 7 | Flotation: Up & back, adjustable springs | Roll Conditioners Type: Chevron intermeshing rubber | Conditioner roll tension adjustment: Single crank | Conditioner gap adjustment: Adjustable drawbolt stop, each end | LeaningEdge Flail Conditioners Conditioner gap adjustment: Single crank adjustable rotor hood | Tongue Options Type: Side-pull, straight tongue
  • Drawbar with CV PTO | Drawbar: ASAE Category II
  • Driveline protection: Slip clutch and overrunning clutch assembly at rear of PTO shaft
  • Tilt angle degrees: 2° - 10° | Roll Conditioners Diameter: 10.4 in. (264 mm) | LeaningEdge Flail Conditioners Diameter: 22 in. (560 mm)
  • 9' 2" in. (2.8 m)
  • With head fully raised: 17 in. (4.32 mm)
  • Cutting: 1.1 2.7 in. (29-68 mm) | Operating: 4' 5" ft. in. (1.35 m)
  • 90 in. (2286 mm) | LeaningEdge Flail Conditioners: 90 in. (2286 mm) | Operating: Flail Tine: 17' 8" ft. in. (5.4 m) or Roll: 17' 2" ft. in. (5.23 m)
  • Swath: 6 ft. (1.83 m) | Operating: 14' 10" ft. in. (4.52 m)
  • 3-6 ft. (0.9 m -1.83 m)
  • 5' 8" ft. in. (1.73 m)
  • Flail Tine: 18' 1" ft. in. (5.50 m) or Roll: 17' 7" ft. in. (5.23 m)
  • 9' 11" ft. in. (3.02 m)
  • Operating: Flail Tine: 3690 lbs. (1674 kg.) / Roll: 3740 lbs. (1697 kg.)
  • MowMax™ Modular Cutterbar with ShockPRO™ hubs
  • LeaningEdge Flail Conditioners Type: Flail rotor with 90 tapered flails
  • Per disc: 2
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • Dothan AL
  • New
  • 010121833
  • 2023
  • New Holland
  • Discbine® 209/210 Side-Pull Disc 209
  • HBJDB209CPN280967
  • 0
  • Available
  • Swath: 6 ft. (1.83 m) | Operating: 14' 10" ft. in. (4.52 m)
  • Cutting: 1.1 2.7 in. (29-68 mm) | Operating: 4' 5" ft. in. (1.35 m)

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.